How do I recover the files from formatted hard drives?
Prepare a storage medium, usually a disk, for reading and writing. When you format a disk, the operating system erases all bookkeeping information on the disk, tests the disk to make sure all sectors are reliable, marks bad sectors (that is, those that are scratched), and creates internal address tables that it later uses to locate information. You must format a disk before you can use it.
Note that reformatting a disk does not erase the data on the disk, only the data on the address tables. Do not be panic, however, if you accidentally reformat a disk that has useful data. A computer specialist should be able to recover most, if not all, of the information on the disk. You can also buy programs that enable you to recover a disk yourself.
The previous discussion, however, applies only to high-level formats, the type of formats that most users execute. In addition, hard disks have a low-level format, which sets certain properties of the disk such as the interleave factor. The low-level format also determines what type of disk controller can access the disk (e.g., RLL or MFM).
Almost all hard disks that you purchase have already had a low-level format. It is not necessary, therefore, to perform a low-level format yourself unless you want to change the interleave factor or make the disk accessible by a different type of disk controller. Performing a low-level format erases all data on the disk.
Explanation
The Format commands are typically run to prepare a new logical drives for use after Fdisked hard drive - enabling the installation of an operating system, application programs & eventual user data. The format command has been around for a long time, formerly they were stand alone DOS programs before being integrated into Windows.
Please see: How do I format a hard drive?
Symptoms
Where previously the computer would boot and be usable, systems that have been Formatted often report the following errors: (these errors are frequently displayed on a black screen with white text.)
- Operating System not found
- Invalid or corrupt FAT
- Cannot find file or program
- Invalid command.com
- Primary/Secondary Hard disk failure
- Non system disk
- Disk error
Or when a partition has been formatted, the all data would disappear.
To recover files from formatted drives, please follow this procedure:
1. Click the "Complete Recovery" button on the main window of Data Recovery Wizard.
2. The first screen on the "Complete Recovery" tool will display a list of volumes found on the drives found in your system. If the volume does not have a drive letter, then the volume will be listed at the hindmost and the drive letter will be instead by "*".
3. You should choose the volume that was formatted and click "NEXT" to start searching on this volume.
4. The Intelligent Searching module will scan on the selected volume, collect and analyze every byte on the volume, then show you a list of volumes which are possible on it.
5. After this scanning is finished, Data Recovery Wizard will permit you choosing 6 volumes at best to recover the data. And then, press "NEXT" button. The Data Recovery Wizard will launch the "Building directory" procedure to searching the files. You will see file/folder tree very soon.
6. Select the file or directory that you want to recover and press the "Next" button.
7. Select a directory and press the "NEXT" button to save the data.
Please see "Complete Recovery" for more details.
NOTE: If the hard disk has mistakenly deleted volumes, hidden volumes, drives with failed operation/file system, you should use "Partition Recovery".
The demo version of Data Recovery Wizard gives you a much fairer idea about chances of data recovery from your hard disk before deciding upon the purchase. You can buy full version to recover data!
Caution: Saving file(s) to the partition or drive from where you are recovering data, for it may result in overwriting of data, and would result in permanent data loss!!!
0 comments:
Post a Comment